Green Advanced Technology
Product
Functional powder and paste
Screen Printing Conductive Paste
스크린 인쇄용 제품을 구현하는 전도성 페이스트입니다.
필름 소재의 기판에 사용되는 인쇄전자 제품에 최적화되었으며,
ROLL TO ROLL 적용을 통한 대량생산에 우수합니다. 분말과 바인더, 페이스트에 대한
기술을 보유하고 있어 고객이 원하는 응용분야에 빠른 대응이 가능합니다.
Product Use
- Screen Printing method
- RFID
- Membrane swich
- Sensor Electrode
- Touch Screen Bezel Electrode
- Printed Electronics
Product Characteristics
- Excellent abrasion resistance and hardness
- Excellent adhesion to substrate
- Low temperature curability
- Short curing time
- Excellent fine line Resolution
- High density electrode can be realized
Properties
CATEGORY
PRODUCT
USE
점도
분말
고형분
경화/소성 조건
전기저항
Functional
Paste
Exink-AS100P
Antenna Membrane switch Sensor
38,000±5,000
Ag
65~72
120 / 20
40
Functional paste
Exink-SS100P
Antenna Membrane switch Low cost
10,000 ± 3,000
Ag
50 ~ 65
120 / 20
50
Functional paste
Exink-FP100P
Fine line resolution of TSP (60㎛/60㎛)
150,000± 10,000
Ag
70 ~ 75
120 / 20
80
Functional paste
Exink-NS200
Nickel paste for Sensor
13,000 ± 5,000
Ni
70 ~ 75
120 / 20
150,000
Functional paste
Exink-BB533
Conductive carbon black
33,000 ± 5,000
Carbon black
18 ~ 25
120 / 20
1,500,000
Functional paste
Exink-RD016
EMI absorbing
50,000 ± 10,000
Sendust
65 ~75
120 / 20
-
Metal Mesh Conductive Paste
GAT Paste is a paste specialized in the manufacture of metal mesh touch sensors utilizing the metal imprinting process.
GAT Paste is an optimized product for manufacturing a touch sensor that replaces ITO by filling the product with
an intaglio of 1 ~ 50㎛, GAT Paste is specialized in manufacturing on medium-to-large-capacitive touch panels with
low electrical resistance characteristics compared to existing products.
Product Use
- Metal Imprinting Method
- Metal Mesh Touch Sensor
- EMI Shielding Film
Product Characteristics
- Low temperature curability
- Short curing time
- Excellent adhesion to substrate
- Excellent cleaning properties
- Excellent R2R continuous processability
Properties
CATEGORY
PRODUCT
USE
점도
분말
고형분
경화/소성 조건
전기저항
Functional
Paste
Exink-MM703
Metal imprint
6,000±3,000
Ag
72~75
85 / 20
40
Functional paste
Exink-MM801
Metal Imprint
7,000±3,000
Ag
74 ~ 77
85 / 20
30
Functional paste
Exink-MM806
Metal Imprint
15,000±3,000
Ag
77 ~ 80
85 / 20
30
Functional paste
Exink-MS705
Metal Imprint
10,000±3,000
Ag
74 ~ 77
85 / 20
30
Functional paste
Exink-MS706
Metal Imprint
14,000±3,000
Ag
77 ~ 78
85 / 20
30
Functional paste
Exink-MS707
Metal Imprint
26,000±3,000
Ag
79 ~ 81
85 / 20
30
Functional paste
Exink-CM603
Metal Imprint
10,000±3,000
Ag + Ag@Cu
75 ~ 78
85 / 20
70
Functional paste
Exink-CM603W
Metal Imprint
10,000±3,000
Ag + Ag@Cu
75 ~ 78
85 / 20
40
Functional paste
Exink-BM503
Metal Imprint
5,000±3,000
Carbon black
25 ~ 35
85 / 20
-
Dispensing Conductive Paste
GAT paste for dispensers is packaged in the form of a syringe, printed in the form of dots and lines,
and is a paste applicable to 3D printing. The main performance is high-speed curing at room temperature and low
temperature, which simplifies the process and lowers the process cost. It has the advantage of excellent electrical
conductivity and no cracking after curing.
Product Use
- Removing static electricity from LCD panel
- Electrode printing using a dispenser
Product Characteristics
- Drying for Room temperature
- Simple processes and costs Down
- High reliability
- Excellent electrical resistance
- Syringe packaging
Glass Frit
Paste
It is applied to form an insulating layer on the surface of a metal substrate using screen printing.
A glass layer is formed on the metal surface through high-temperature firing to
form an insulating layer for various functional printed films.
Product Use
- Insulation layer for LED circuit
- Insulation layer for water heater
- Insulation layer for planar heating element
- Electrode manufacturing for high temperature firing
Product Characteristics
- Excellent insulation properties
- Various materials for metal substrates (SUS430, SUS304, etc.)
- Product composition by firing temperature
스크린 인쇄용 제품을 구현하는 전도성 페이스트입니다.
필름 소재의 기판에 사용되는 인쇄전자 제품에 최적화되었으며,
ROLL TO ROLL 적용을 통한 대량생산에 우수합니다. 분말과 바인더, 페이스트에 대한
기술을 보유하고 있어 고객이 원하는 응용분야에 빠른 대응이 가능합니다.
- Screen Printing method
- RFID
- Membrane swich
- Sensor Electrode
- Touch Screen Bezel Electrode
- Printed Electronics
- Excellent abrasion resistance and hardness
- Excellent adhesion to substrate
- Low temperature curability
- Short curing time
- Excellent fine line Resolution
- High density electrode can be realized
| CATEGORY | PRODUCT | USE | 점도 | 분말 | 고형분 | 경화/소성 조건 | 전기저항 |
|---|---|---|---|---|---|---|---|
| Functional Paste |
Exink-AS100P | Antenna Membrane switch Sensor | 38,000±5,000 | Ag | 65~72 | 120 / 20 | 40 |
| Functional paste | Exink-SS100P | Antenna Membrane switch Low cost | 10,000 ± 3,000 | Ag | 50 ~ 65 | 120 / 20 | 50 |
| Functional paste | Exink-FP100P | Fine line resolution of TSP (60㎛/60㎛) | 150,000± 10,000 | Ag | 70 ~ 75 | 120 / 20 | 80 |
| Functional paste | Exink-NS200 | Nickel paste for Sensor | 13,000 ± 5,000 | Ni | 70 ~ 75 | 120 / 20 | 150,000 |
| Functional paste | Exink-BB533 | Conductive carbon black | 33,000 ± 5,000 | Carbon black | 18 ~ 25 | 120 / 20 | 1,500,000 |
| Functional paste | Exink-RD016 | EMI absorbing | 50,000 ± 10,000 | Sendust | 65 ~75 | 120 / 20 | - |
GAT Paste is a paste specialized in the manufacture of metal mesh touch sensors utilizing the metal imprinting process.
GAT Paste is an optimized product for manufacturing a touch sensor that replaces ITO by filling the product with
an intaglio of 1 ~ 50㎛, GAT Paste is specialized in manufacturing on medium-to-large-capacitive touch panels with
low electrical resistance characteristics compared to existing products.
- Metal Imprinting Method
- Metal Mesh Touch Sensor
- EMI Shielding Film
- Low temperature curability
- Short curing time
- Excellent adhesion to substrate
- Excellent cleaning properties
- Excellent R2R continuous processability
| CATEGORY | PRODUCT | USE | 점도 | 분말 | 고형분 | 경화/소성 조건 | 전기저항 |
|---|---|---|---|---|---|---|---|
| Functional Paste |
Exink-MM703 | Metal imprint | 6,000±3,000 | Ag | 72~75 | 85 / 20 | 40 |
| Functional paste | Exink-MM801 | Metal Imprint | 7,000±3,000 | Ag | 74 ~ 77 | 85 / 20 | 30 |
| Functional paste | Exink-MM806 | Metal Imprint | 15,000±3,000 | Ag | 77 ~ 80 | 85 / 20 | 30 |
| Functional paste | Exink-MS705 | Metal Imprint | 10,000±3,000 | Ag | 74 ~ 77 | 85 / 20 | 30 |
| Functional paste | Exink-MS706 | Metal Imprint | 14,000±3,000 | Ag | 77 ~ 78 | 85 / 20 | 30 |
| Functional paste | Exink-MS707 | Metal Imprint | 26,000±3,000 | Ag | 79 ~ 81 | 85 / 20 | 30 |
| Functional paste | Exink-CM603 | Metal Imprint | 10,000±3,000 | Ag + Ag@Cu | 75 ~ 78 | 85 / 20 | 70 |
| Functional paste | Exink-CM603W | Metal Imprint | 10,000±3,000 | Ag + Ag@Cu | 75 ~ 78 | 85 / 20 | 40 |
| Functional paste | Exink-BM503 | Metal Imprint | 5,000±3,000 | Carbon black | 25 ~ 35 | 85 / 20 | - |
GAT paste for dispensers is packaged in the form of a syringe, printed in the form of dots and lines,
and is a paste applicable to 3D printing. The main performance is high-speed curing at room temperature and low
temperature, which simplifies the process and lowers the process cost. It has the advantage of excellent electrical
conductivity and no cracking after curing.
- Removing static electricity from LCD panel
- Electrode printing using a dispenser
- Drying for Room temperature
- Simple processes and costs Down
- High reliability
- Excellent electrical resistance
- Syringe packaging
Paste
It is applied to form an insulating layer on the surface of a metal substrate using screen printing.
A glass layer is formed on the metal surface through high-temperature firing to
form an insulating layer for various functional printed films.
- Insulation layer for LED circuit
- Insulation layer for water heater
- Insulation layer for planar heating element
- Electrode manufacturing for high temperature firing
- Excellent insulation properties
- Various materials for metal substrates (SUS430, SUS304, etc.)
- Product composition by firing temperature